

![]()
![]()




|
GPR 12-70 |
GPR 53X |
GPR 12-70X |
|
| Scales | Brix Temperature corrected Brix 10 user scales Temperature corrected RI |
Refractive Index (RI) Brix Temperature corrected Brix 10 user scales Temperature corrected RI |
Refractive Index (RI) Brix Temperature corrected Brix 10 user scales Temperature corrected RI |
| Range |
RI 1.32 to 1.68 Brix 0 to 100% |
RI 1.32 to 1.53 Brix 0 to 95% |
RI 1.32 to 1.68 Brix 0 to 100% |
| Readability |
RI 0.0001 Brix 0.1% |
RI 0.00001 Brix 0.01% |
RI 0.00001 Brix 0.01% |
| Accuracy |
RI ± 0.0001 Brix ± 0.1 |
RI ± 0.00003 @ 1.33 Brix ± 0.02 @ 0% |
RI ± 0.00005 from 1.33 to
1.45 ± 0.0001 from 1.45 to 1.68 Brix ± 0.05 from 0 to 65% ± 0.1 from 65 to 100% |
| Special feature |
Touch button selection of
normal or emulsion type samples Data Storage for up to 100 test results |
Data Storage for up to 100 test results |
Touch button selection of normal or emulsion type samples Data Storage for up to 100 test results |
| Scan time | Approximately 2 seconds | Approximately 1 second | 2~6 seconds, depending on resolution |
![]() |
589 nm |
| Operating modes |
Continuous update or single scan with user programmable delay time or
single |
| Display |
Illuminated alphanumeric, 2 lines of 24 characters |
| Light source |
L.E.D. |
| Prism material |
Synthetic sapphire |
| Temperature |
Displayed continuously to 0.1°C with sample reading |
| Thermostatic control |
By use of circulating fluid, temperature range 5°C to 70°C |
| Controls |
Set zero, print, numeric keyboard for programming functions |
| Outputs/inputs |
2 x RS232, 1 x remote |
| Power requirements |
86~265V AC, 47~63Hz, less than 7 watts |
| Dimensions and weight |
Refractometer: w 235 x d 260 x h 255 mm; 8kg |
| Packed weight |
12kg (dimensions of pack 50 x 40 x 35 cm) |